Zum Hauptinhalt springen

Können Transversalflußmotoren das Potenzial der Elektrifizierung noch besser ausschöpfen?

Friday, November 6, 2026

Was steht in diesem Artikel?

  1. a.A different approach to generating torque
  2. b.Why has adoption remained limited?
  3. c.Moving from engineering potential to commercial application
  4. d.Finding the right applications

Electrification is creating new demands for electric motor design. Applications from industrial equipment to advanced robotics need motors capable of delivering more torque without simply becoming larger, heavier or more complex at system level.

One technology offering a different approach is the transverse flux motor.

At CWIEME Berlin 2026, Scott Reynolds, Director of Commercialization at Electric Torque Machines (ETM), explored how transverse flux technology has developed from a long standing engineering concept into a commercially viable option for selected applications. From Research to Reality - Engi…

A different approach to generating torque

Transverse flux technology can trace its origins back to the 1890s, but its architecture differs significantly from conventional radial and axial flux machines.

A central characteristic is the ability to decouple the electrical and magnetic circuits. This allows designers to increase pole count while maintaining low coil resistance, supporting high torque generation without a corresponding increase in motor size. From Research to Reality - Engi…

That combination can be particularly useful in applications requiring high torque at relatively low speeds.

It can also create opportunities for direct drive systems. By generating the required torque without additional transmission components, engineers may be able to remove mechanical complexity elsewhere in the system.

For applications operating over high duty cycles, the potential benefits extend to reduced material use and improved reliability.

Why has adoption remained limited?

If the underlying concept has existed for more than a century, why are transverse flux motors not more widespread?

Manufacturing is one reason.

Transverse flux machines use complex three dimensional magnetic flux paths, creating challenges for both simulation and production. Specialist tooling and assembly processes can require significant investment, while design teams face a substantial learning curve.

Thermal management and power factor optimisation also need careful consideration.

The session highlighted intellectual property as another factor. Engineers entering this area need to work within a heavily patented technology landscape, adding another consideration to development and commercialisation. From Research to Reality - Engi…

Advances in simulation and manufacturing are helping address some of these barriers, but transverse flux remains a technology where the application needs to justify the additional design and production requirements.

Moving from engineering potential to commercial application

Importantly, transverse flux motors are not confined to research environments.

The technology has already been commercialised in applications including marine propulsion, paint sprayers and ceiling fans. The presentation highlighted how direct drive architectures have removed transmission components and reduced material content in some applications. From Research to Reality - Engi…

Compatibility with standard drives can also make integration more practical.

This points towards an important consideration for motor developers. The value of a new motor architecture does not come from improving an individual specification in isolation. It comes from what that improvement enables across the complete system.

Higher torque density, for example, may allow a smaller motor. Direct drive may remove gears or other transmission components. Reduced coil resistance may support performance in applications where duty cycle and thermal behaviour are critical.

Finding the right applications

Transverse flux motors are unlikely to replace established motor architectures across every application. Their potential lies in matching their characteristics to requirements where high torque density, low speed operation or direct drive can provide a meaningful system advantage.

That is why exchanges between researchers, motor manufacturers and application engineers matter.

CWIEME Berlin provides a platform for those conversations, connecting developments in motor technology with the manufacturing expertise needed to move ideas into production.

As electrification expands into more demanding applications, motor design will continue to diversify. For transverse flux technology, the opportunity is now about identifying where its distinctive engineering characteristics can translate into practical commercial value.

Artikel
Fertigungstechnologien und Innovationen